This is my version of custom mono shock. This is a rip off of some other mono shock system that I had seen. System should be similar but may be different.
I didn't have a spare springs that fit at this moment. FYI this current setup is too high for body shell. It is recommended that the spring be attached to the lower holes. The reason for this mod, is that the E4D wheels were hitting the original springs. This helps to reduce that problem. Your trailing wheel will have better angle after this mod.
Items Needed:
2 X E4D MF Steering Set
2 X Adjustable Rods 50mm
4 X Rod Ends (M3 holes)
Instructions:
Install Rod ends with one end of the adjustable rod to bottom lower arm.Link the other end to the MF Steering Set arm. (Use the shorter arm)
Connect both sides accordingly.
Attach other Steering arms to Spring
There you go.
No comments:
Post a Comment